Photoluminescent Glow In Dark Film

Safe Warning Tape Company is a manufacturer of photoluminescent glow in dark film for emergency exit signs, stair edge marking, corridor marking, and safety wayfinding systems. This self adhesive photoluminescent safety film absorbs light from indoor lamps or daylight and gives visible afterglow when the surrounding light is reduced. It is supplied as rolls, slit rolls, sheets, or cuttable material for safety sign converters, building marking projects, and evacuation route identification.

Product Video

Product Photos

Product Overview

This safety marking material is different from reflective film or ordinary fluorescent green film. Reflective film needs an external light beam to return visibility. This film works through a photoluminescent layer that stores light energy after charging and then releases visible guidance when lighting drops. For real safety route use, performance should be checked by charging condition, luminance decay, viewing distance, and the actual installation environment, not by a simple “long glow time” claim.

As a factory reference, a standard grade film can be evaluated after 60 minutes of charging under 1000 lux fluorescent light. Under this test condition, typical luminance may reach 120-180 mcd/m2 at 10 minutes and 15-25 mcd/m2 at 60 minutes. The result may vary with film grade, pigment loading, coating uniformity, and the test setup. These values are typical tested values, not universal certification results. For safety projects, final visibility should still be checked under the lighting condition of the building, because charging intensity and exposure time directly affect afterglow performance.

The adhesive backing is made for clean, dry, smooth surfaces, including aluminum sign panels, acrylic boards, painted metal, glass, PVC sheets, and prepared wall panels. For stair edge luminous marking film, corridor guide strips, and low-location route markers, the surface should be free from oil, dust, moisture, and loose coating before installation. A normal application temperature range is 10 C-40 C, which helps the acrylic pressure sensitive adhesive form a stable bond during application.

Benefits

• Practical glow performance reference: 10 min and 60 min luminance values give sign producers a clearer way to compare visibility after charging.
• Clear charging logic: The film needs enough light exposure before use, making it suitable for planned emergency exit and route marking systems.
• Adhesive backing for prepared surfaces: The acrylic adhesive and 120-140 g/m2 release liner support clean peeling, positioning, and bonding on smooth panels.
• Roll/slit supply flexibility: Master rolls, slit rolls, sheets, and die-cut pieces can support printing, slitting, laminating, and converting work.
• Stable converting control: Typical slit tolerance can be controlled within +/-1 mm, helping reduce edge waste and improve alignment during roll processing.
• Suitable for safety graphics: The surface can support screen printing, UV printing, cutting, and laminating for arrows, symbols, legends, and route strips.

What affects the visible performance of photoluminescent glow in dark film?

The visible performance of photoluminescent glow in dark film depends on more than the film itself. The photoluminescent layer must first absorb enough light from indoor lamps, daylight, or approved project lighting before it can release stored energy in darkness. Charging time, light intensity, pigment loading, film thickness, and viewing distance all affect the result. For safety sign production, a practical test should record luminance decay after charging, especially at 10 minutes and 60 minutes, because these two reading points show both early brightness and later route visibility.

TDS

Applications

• Emergency exit signs: For exit legends, directional arrows, evacuation maps, and door identification panels.
• Stair edge: Used for step edge strips, landing indicators, and low-position movement guidance.
• Corridor marking: Suitable for corridor safety guidance film, wall guide strips, turns, and passageway route markers.
• Safety wayfinding: Helps mark doors, handrails, equipment points, route changes, and final exit directions.
• Sign production: Used by converters to produce luminous emergency exit sign film, printed symbols, die-cut labels, and laminated safety panels.
• Industrial buildings:Suitable for factories, warehouses, parking areas, public corridors, service rooms, and facility safety upgrades.

How should adhesive photoluminescent film be used for safety wayfinding?

Adhesive photoluminescent film works best when it is used as part of a planned safety route, not as one isolated label. The adhesive backing allows the film to be applied to clean, dry, smooth surfaces or laminated onto rigid sign panels for emergency exit signs, directional arrows, door frame markers, stair edge indicators, and corridor guide strips. In a building layout, each marker should guide people toward the next safe movement point, such as a turn, landing, door, handrail, or exit route. For roll/slit supply, consistent width, stable liner release, clean cutting edges, and +/-1 mm slitting control are important because converters may print, slit, die cut, or laminate the film before final installation. This makes photoluminescent safety wayfinding film more practical for complete route marking systems.

FAQ

1. Does this film glow permanently?

No. It absorbs light first and then releases visible afterglow. The brightness gradually decreases over time, so charging condition and luminance decay should be checked for each project.

2. Is this the same as reflective film?

No. Reflective film needs an external light beam. This film stores light energy after charging and remains visible for a limited period when lighting is reduced.

3. Can it be printed and cut into signs?

Yes. It can be screen printed, UV printed, slit, die cut, and laminated for emergency exit signs, arrows, stair strips, and corridor markers.

4. What surface is suitable for installation?

The adhesive backing performs best on clean, dry, smooth surfaces such as metal panels, acrylic boards, glass, PVC sheets, and prepared painted surfaces.