Safe Warning Tape Company manufactures anti slip safety tape for commercial floors, industrial walkways, wet areas, stairs, ramps, platforms, and access surfaces where safer footing is required. The range includes mineral grit tape, clear textured tape, waterproof slip resistant tape, non-abrasive wet-area tape, glow surface tape, pre-cut treads, and bulk rolls. Selection can be matched by floor material, traffic level, moisture exposure, grip requirement, adhesive system, and converting format before larger project use.
Showing all 4 results
Common Size: 25 mm, 50 mm, 100 mm widths; custom lengths available
Color: Transparent, translucent white, light gray options
Material: PEVA/PVC textured film with pressure-sensitive acrylic adhesive
Thickness: Approx. 0.45-0.75 mm depending on grade
Adhesive: Waterproof acrylic adhesive compatible with smooth tile surfaces
Use Area: Bathroom tiles, shower floors, bathtub edges, wet ceramic tile areas
Anti slip safety tape is used when a walking surface becomes too smooth, wet, dusty, sloped, worn, or exposed to frequent foot traffic. A hotel stair, pool edge, concrete ramp, factory platform, metal tread plate, and warehouse dock all need different grip, adhesive contact, wear resistance, cleaning tolerance, and appearance.
The material normally combines a stable backing, traction surface, pressure sensitive adhesive, and release liner. Mineral grit gives stronger bite for shoes on ramps, stairs, factories, and loading areas. Clear textured film keeps tile, stone, or sealed wood visible while adding light to medium traction. PEVA and non-abrasive wet-area surfaces are used where water, cleaning frequency, and barefoot contact are important.
During sample review, practical checks include wet/dry friction feel, adhesive wet-out, edge lifting after roller pressure, grit coverage, liner release, roll edge condition, and tape flatness after cutting. Many installation problems come from concrete dust, wax, detergent film, loose coating, edge moisture, uneven metal texture, or insufficient pressure.
Mineral grit tape uses PVC or PET backing with aluminum oxide or mineral particles for concrete stairs, ramps, factory walkways, platforms, and work-boot areas. Grit level should match traffic level and shoe contact. Clear textured tape suits hotels, schools, retail entrances, finished tile, sealed wood, and appearance-sensitive floors. Wet area tape uses PEVA or non-abrasive textured film for pool edges, locker rooms, and wash zones. Commercial anti slip tape uses stronger backing and adhesive for warehouses, public stairs, workshops, and repeated shoe contact. Glow surface tape supports low-light identification, while pre-cut treads and bulk rolls support repeated installation sizes and converting.
Start selection with the floor surface. Smooth tile needs clean adhesive contact. Sealed wood should be checked for coating compatibility. Metal steps need firm pressure rolling near tread edges. Concrete can hold dust in surface pores, so powder residue should be removed before testing. For porous concrete, a primer trial can confirm bonding. Wet entrances, pool edges, and cleaned floors often need waterproof slip resistant tape with better edge control. Barefoot wet zones should not automatically use aggressive coarse grit because it may feel too sharp and may hold more residue.
PVC film with acrylic PSA is suitable for general stairs, tile, and commercial floors, but oil, wax, or detergent film may cause edge lifting. PET film with high tack adhesive supports stable converting and pre-cut treads, but it may be too stiff for uneven metal patterns unless pressure rolling is confirmed. PEVA film with wet-area adhesive suits pool edges and locker rooms, while foil backing can help on checker plate if pressed into the raised texture. A 24-72 hour dwell observation, wet-area check, and edge lifting test are recommended before larger use.
Item | Typical Range / Customizable Value |
Product Category | Mineral grit, clear textured, wet area, commercial floor, glow, and pre-cut treads |
Backing Material | PVC, PET, PEVA, aluminum foil, and conformable backing |
Surface Structure | Aluminum oxide, mineral grit, fine texture, non-abrasive, or glow surface |
Adhesive System | Acrylic PSA, rubber adhesive, high tack adhesive, or wet-area option |
Total Thickness | 0.30 mm-1.50 mm by backing, grit level, and surface |
Standard Width | 25 mm, 50 mm, 75 mm, 100 mm, 150 mm, 300 mm, custom to 1200 mm |
Roll Length | 5 m, 10 m, 15 m, 18.3 m, 20 m, 25 m, 50 m, or bulk length |
Temperature Reference | Typical indoor/outdoor range from -10 C to 80 C by adhesive system |
Custom Processing | Slitting, die-cut strips, kiss-cut parts, stair treads, and private label rolls |
Anti slip safety tape can be used on hotel stairs, school ramps, public walkways, factory platforms, ladders, machine steps, warehouse floors, loading ramps, dock steps, pool edges, locker rooms, wet corridors, hospitals, gyms, shopping centers, concrete steps, metal tread plates, sealed wood stairs, tile floors, and OEM equipment steps.
Safe Warning Tape Company can adjust width, length, adhesive, grit roughness, liner type, color, die-cut shape, roll core, and private label presentation according to floor surface, installation quantity, and converting requirements. Surface choices include clear textured film, mineral grit, non-abrasive wet-area texture, glow surface, and heavy-duty commercial grit. Adhesive can be matched to tile, sealed wood, metal, concrete, wet exposure, or higher initial tack.
Good installation starts before the tape touches the floor. Dust, oil, wax, detergent film, loose paint, concrete powder, and moisture can weaken adhesive contact, so the area should be cleaned and dried first. On stair nosing, the tape should sit where the shoe naturally lands while avoiding broken edges, grout gaps, and drainage channels. A pressure roller or firm hand pressure helps the adhesive flow into the surface texture. For outdoor stairs, wet entries, porous concrete, or rough flooring, primer or edge sealing can be considered after sample testing.
PEVA film, clear textured film, or non-abrasive wet-area surfaces are often selected because they support traction while staying easier to clean. Check water exposure, detergent residue, barefoot comfort, and edge lifting.
Yes. Concrete may need dust removal or primer trial. Metal needs firm pressure rolling. Tile should be cleaned of detergent film. Sealed wood should be tested for coating compatibility.
Mineral grit tape provides stronger traction for stairs, ramps, factories, and loading areas. Clear textured tape is better when floor appearance should remain visible.
Yes. Width, length, grit level, surface type, adhesive, color, liner, and shape can be customized as slit rolls, bulk rolls, stair strips, die-cut treads, kiss-cut parts, and private label rolls.
