Flagging Tape Non Adhesive
- Size: 1 in, 1 3/16 in, 1.5 in
- Length: 150 ft, 300 ft, 600 ft
- Material: PE, PVC, PP optional
- Colors: orange, pink, yellow, red, blue, green, white
- Structure: non-adhesive plastic ribbon
- Use: tie, wrap, knot, or staple
Safe Warning Tape Company is a high visibility warning tape manufacturer for temporary isolation, construction marking, warehouse control, and restricted zones. This shortened copy keeps the key range, selection logic, technical references, customization points, and application guidance. It covers barrier tape, flagging tape, PE warning film, printed security tape, and indoor floor marking tape.
Product Details
- Size range: 25-150 mm width, 18-500 m roll length.
- Main colors: yellow-black, red-white, orange, fluorescent red, fluorescent lime.
- Materials: PE, LDPE, HDPE, OPP, PVC, and vinyl.
- Types: barrier tape, flagging tape, PE warning film, printed barrier tape, and adhesive floor marking tape.
- Custom options: warning text, logo, color, width, thickness, roll length, and repeat print distance.
- Use cases: construction sites, warehouses, factories, maintenance zones, event control, and restricted areas.
Showing all 3 results
-
-
Industrial Floor Marking Tape
- Material: PVC/vinyl film
- Adhesive: Rubber pressure-sensitive adhesive
- Common widths: 48 mm, 50 mm, 75 mm, 100 mm
- Common colors: Yellow, red, blue, green, white, black, striped
- Roll length: 30 m, 33 m, 50 m, custom length
- Use surface: Clean concrete, epoxy floor, sealed industrial floor
-
Non Adhesive Barrier Tape
- Material: PE, LDPE, or HDPE film
- Common Width: 50 mm, 75 mm, 100 mm
- Thickness: 30 um-100 um
- Roll Length: 100 m, 200 m, 300 m, 500 m
- Colors: yellow/black, red/white
- Installation: tying, stapling, nailing, wrapping
High visibility warning tape creates a clear visual boundary around repair zones, temporary hazards, restricted passages, or controlled work spaces. Selection should start from the real use method: tied between cones, fixed to posts, wrapped on fixtures, used as a marker, or applied indoors.
For construction site warning tape, non-adhesive plastic barrier tape is practical because workers can pull, cut, tie, and remove it quickly. Smooth unwind, film tear behavior, and print readability matter more than adhesive strength. In sample checking, the roll can be pulled at normal hand speed to see whether the film twists or breaks. CAUTION, DANGER, KEEP OUT, or DO NOT ENTER should remain readable from about 3-5 m.
Flagging tape is lighter and narrower for survey points, tagging, route marking, or color identification. Floor marking tape is for indoor warehouse and factory marking, where adhesive tack, floor cleanliness, and 24-hour edge lifting are more important.When mechanical durability matters, compare the tensile strength and elongation test data after identifying construction and thickness.
Product Range / Covered Products
Product Series | Main Use | Typical Structure | Procurement Notes |
Barrier Series | Temporary isolation and restricted access | Non-adhesive PE/LDPE/HDPE/OPP film | Select by span, wind exposure, fixing method, and print readability. |
PE Warning Film | Lightweight hazard marking | One-side or two-side printed PE film | Good for fast dispensing, low roll weight, and simple removal. |
Flagging Tape | Survey marking and route tagging | Narrow PVC, vinyl, or PE strip | Use bright colors when warning text is not required. |
Printed Security Barrier | KEEP OUT or DO NOT ENTER line | Printed non-adhesive plastic film | Confirm message length, repeat distance, direction, and contrast. |
Indoor Floor Marking | Warehouse aisles and work cells | PVC/vinyl film with pressure-sensitive adhesive | Use on clean floors and test edge lifting before production. |
Selection Guide
A common mistake is treating all warning tape rolls as interchangeable. Thin flagging tape should not replace a wider barrier roll for long-span isolation. Low-thickness PE warning tape may be economical, but may not suit stronger tear resistance, longer viewing distance, or outdoor pulling. Adhesive floor marking tape should be checked on dusty, oily, or rough floors because edge lifting may appear later.
Start with the application, then refine material, adhesive structure, thickness, and print layout. PE and HDPE film are practical for temporary barriers because they are light, easy to unwind, and simple to tie off. OPP supports smoother print and cleaner roll winding. PVC and vinyl suit flexible flagging tape or adhesive indoor floor marking tape.When customs documentation depends on adhesive status, backing, printing, roll width, or added layers, review Warning Tape HS Code & Customs Classification before reusing a code from another construction.
Benefits
- Creates fast visual boundaries for temporary hazards and restricted areas.
- High-contrast colors support clearer workplace safety communication.
- Printed warning messages reduce confusion in noisy or busy locations.
- Non-adhesive rolls are quick to dispense, cut, tie off, and remove.
- Sample checks help confirm print clarity, unwind performance, tear behavior, color contrast, and adhesive tack.
When Is Non-Adhesive Warning Tape Better Than Adhesive Floor Marking Tape?
Non-adhesive warning tape is better when the marked area changes frequently or workers need a temporary boundary without surface preparation. Construction entrances, loading bay repairs, maintenance zones, restricted work areas, and event lines normally use PE or OPP barrier tape tied between cones, posts, or fences. Adhesive floor marking tape is better when the position is fixed, such as warehouse aisles, equipment boundaries, production zones, and floor reminders. One product depends on film strength and unwind behavior; the other depends on adhesive tack and floor compatibility.
TDS / Technical Range
Item | Typical Range / Customizable Value |
Product category | Barrier tape, flagging tape, PE warning film, printed barrier tape, indoor floor marking tape |
Material range | PE, LDPE, HDPE, OPP, PVC, vinyl |
Structure type | Non-adhesive film tape, narrow flagging tape, adhesive floor marking tape |
Typical thickness | 30-120 um PE/OPP film; 100-200 um PVC/vinyl floor tape |
Width / length | 25-150 mm width; 50-500 m barrier roll; 30-150 m flagging roll; 18-50 m floor tape |
Color options | Yellow-black, red-white, orange-black, solid orange, fluorescent red, fluorescent lime |
Printing options | CAUTION, DANGER, KEEP OUT, DO NOT ENTER, RESTRICTED AREA, logo, multilingual text |
Adhesive option | No adhesive for barrier/flagging tape; pressure-sensitive adhesive for floor marking tape |
Factory checks | Color contrast, 3-5 m readability, roll unwind, tensile/tear, edge lifting |
Applications
- Temporary entrance control for construction sites, repair zones, and restricted passages.
- Barrier rolls around machinery repair, loading bay maintenance, and caution areas.
- Non-adhesive plastic tape for cones, posts, fences, temporary fixtures, and event control.
- PE warning film rolls for bulk project marking where fast dispensing is required.
- Printed messages such as KEEP OUT, DO NOT ENTER, and RESTRICTED AREA.
- Flagging tape for survey points, temporary tagging, route marking, and color identification.
- Indoor floor marking tape for warehouse aisles, walkways, work cells, and equipment boundaries.
- Work zones involving pressurized pipelines, vessels, or temporary manifolds may require a coordinated combination of tape, signs, and controlled access; see the hydrostatic testing work-zone marking guide.
Customization Options
Safe Warning Tape Company can adjust specifications according to site use. For barrier tape, common settings include film grade, thickness, width, roll length, color combination, text repeat spacing, print direction, roll tension, and core size. For flagging tape, customers usually confirm width, color, hand tear feel, and visibility. For floor marking tape, sample checks should focus on adhesive tack, 24-hour edge lifting, surface cleanliness, and clean-removal on the target indoor floor.For applications involving temporary public exclusion, responder access, and changing emergency perimeters, see our emergency incident scene control solution.
Custom printed tape should keep the message short enough to read at distance. Confirm artwork position, color reference, film thickness tolerance, roll diameter, print repeat accuracy, and batch consistency.
How Should You Select Colors, Materials, and Printed Messages for High Visibility Warning Tape?
Color selection should start from risk level, viewing distance, and background. Yellow-black is often used for caution reminders, while red-white gives a stronger restricted-area signal. Orange, fluorescent red, and fluorescent lime can improve visibility around construction sites, warehouse doors, and barriers. PE and OPP suit lightweight non-adhesive barrier tape. PVC is often used for flagging tape and indoor floor marking tape. Printed words should stay short enough to read from a distance.
FAQ
What is high visibility warning tape used for?
It is used for temporary isolation, hazard reminders, construction site marking, restricted area control, warehouse aisle identification, and maintenance zone separation.
What is the difference between barrier tape, flagging tape, and floor marking tape?
Barrier tape is non-adhesive plastic tape for temporary blocking. Flagging tape is narrower for point marking. Floor marking tape has adhesive backing for indoor floors.
Can high visibility warning tape be custom printed?
Yes. Warning text, logo, repeat distance, color pattern, roll width, film thickness, roll length, and material can be customized.
Which material should be selected for construction site warning tape?
PE, LDPE, HDPE, and OPP are practical for non-adhesive construction warning tape. PVC or vinyl is more suitable for flagging tape or floor marking tape.
