No products were found matching your selection.

Other Related Products

  • Underground Warning Tape With Tracer Wire

    • Material: PE/OPP laminated film
    • Tracer wire: SS304 or SS316
    • Wire diameter: 0.4mm, 0.5mm, 0.7mm
    • Tape thickness: 100um, 130um, 150um
    • Width/length: 75mm-300mm, 100m-500m
    • Color/print: APWA colors, custom legends
    Read moreDone

  • Detectable Underground Utility Marking Tape

    • Common Widths: 2 inch, 3 inch, 6 inch, or project-specific width
    • Roll Lengths: 500 ft, 1000 ft, or custom roll length
    • Structure: PE or PET film with continuous aluminum foil layer
    • Colors: APWA red, yellow, orange, blue, green, purple and custom colors
    • Printing: Buried utility legends, 20 inch – 36 inch repeat available
    • Use: Direct burial above utility lines before trench backfill
    Read moreDone

  • Thermoplastic Road Marking Tape

    •  Typical Thickness: 1.6-2.2mm
    •  Colors: White, yellow, red, blue, black
    •  Material: Hot-melt thermoplastic compound
    •  Reflective Structure: Embedded glass beads
    •  Installation: Torch heating, compression, cooling
    •  Uses: Lines, arrows, symbols, crosswalks
    Read moreDone

  • Reflective Traffic Safety Tape

    • Standard Size: 50 mm x 45.7 m
    • Colors: Red-white, yellow-black, yellow, white, orange-white
    • Material: PET or PVC reflective film
    • Adhesive: Outdoor acrylic pressure sensitive adhesive
    • Reflective Grade: Engineer grade, high intensity, microprismatic
    • Format:Roll, slit roll, pre-cut strip
    Read moreDone

  • Warning Tape Solutions for the Electrical Industry

    Warning tapes for the electrical industry do not perform one single job. A temporary maintenance boundary, an adhesive line around electrical equipment, and a buried warning layer above a power route create different demands on visibility, attachment, durability, and removal. The selection should start with the work condition: temporary or fixed, adhesive or non-adhesive, above…

    Read moreDone

  • Flagging Tape Non Adhesive

    • Size: 1 in, 1 3/16 in, 1.5 in
    • Length: 150 ft, 300 ft, 600 ft
    • Material: PE, PVC, PP optional
    • Colors: orange, pink, yellow, red, blue, green, white
    • Structure: non-adhesive plastic ribbon
    • Use: tie, wrap, knot, or staple
    Read moreDone

  • DOT Trailer Reflective Tape Requirements: Placement and Installation Guide

    DOT trailer reflective tape requirements combine vehicle eligibility, placement dimensions, material identification, optical performance, adhesive behavior, and installation control. This reference applies to pressure-sensitive red-and-white conspicuity sheeting used on qualifying commercial trailers and semitrailers. Regulatory dimensions are mandatory where applicable, while thickness, peel adhesion, holding power, temperature, and weathering values remain grade-specific or project-confirmed. Verify…

    Read moreDone

  • Non Adhesive Barrier Tape

    • Material: PE, LDPE, or HDPE film
    • Common Width: 50 mm, 75 mm, 100 mm
    • Thickness: 30 um-100 um
    • Roll Length: 100 m, 200 m, 300 m, 500 m
    • Colors: yellow/black, red/white
    • Installation: tying, stapling, nailing, wrapping
    Read moreDone

  • Emergency Services Barrier Tape Solutions for Incident Scene Control

    Emergency services barrier tape helps response teams create visible, temporary boundaries around fire scenes, rescue operations, vehicle incidents, damaged structures, hazardous releases, and other changing work areas. Effective incident scene control depends on more than tape color or roll size. Teams should first define the hazard, who requires access, how the perimeter may change, and…

    Read moreDone