No products were found matching your selection.

Other Related Products

  • Flagging Tape Non Adhesive

    • Size: 1 in, 1 3/16 in, 1.5 in
    • Length: 150 ft, 300 ft, 600 ft
    • Material: PE, PVC, PP optional
    • Colors: orange, pink, yellow, red, blue, green, white
    • Structure: non-adhesive plastic ribbon
    • Use: tie, wrap, knot, or staple
    Read moreDone

  • Glow In The Dark Anti Slip Tape

    • Product: glow in the dark anti slip tape
    • Brand: Safe Warning Tape Company
    • Backing: PET or PVC film
    • Surface: coarse mineral grit
    • Use areas: stairs, corridors, ramps, landings
    • Custom options: width, roll length, cut size
    Read moreDone

  • Non Adhesive Barrier Tape

    • Material: PE, LDPE, or HDPE film
    • Common Width: 50 mm, 75 mm, 100 mm
    • Thickness: 30 um-100 um
    • Roll Length: 100 m, 200 m, 300 m, 500 m
    • Colors: yellow/black, red/white
    • Installation: tying, stapling, nailing, wrapping
    Read moreDone

  • Industrial Testing and Maintenance Work Zone Safety Solutions

    Hydro testing barrier tape helps define a temporary restricted-access boundary around pipelines, pressure vessels, manifolds, valves, hoses, and maintenance equipment during pressure-related work. The boundary should follow the approved test plan and site-specific risk assessment rather than a universal distance or color rule. Selection depends on warning visibility, printed-message clarity, wind exposure, support spacing, expected…

    Read moreDone

  • Reflective Tape Technical Data: DOT-C2, Conspicuity & Prismatic Sheeting Specifications

    Conspicuity tape DOT C2 data should define material construction, dimensions, photometric performance, adhesive behavior, temperature limits, surface compatibility, and the conditions behind each result. This record is for pressure-sensitive microprismatic vehicle marking sheeting, not ordinary reflective tape. Regulatory minimums support screening, while peel behavior, edge stability, weathering response, and removal observations should be confirmed by sample testing on the intended coated surface before full use.

    Read moreDone

  • DOT Trailer Reflective Tape Requirements: Placement and Installation Guide

    DOT trailer reflective tape requirements combine vehicle eligibility, placement dimensions, material identification, optical performance, adhesive behavior, and installation control. This reference applies to pressure-sensitive red-and-white conspicuity sheeting used on qualifying commercial trailers and semitrailers. Regulatory dimensions are mandatory where applicable, while thickness, peel adhesion, holding power, temperature, and weathering values remain grade-specific or project-confirmed. Verify…

    Read moreDone

  • Non Detectable Underground Warning Tape

    • Material: PE, LDPE, or LLDPE non-adhesive film
    • Thickness: 4 mil / 0.1 mm, typical tolerance +/- 10%
    • Widths: 3 inch, 6 inch, 12 inch, or 50 / 75 / 100 / 150 mm
    • Roll lengths: 100 m, 250 m, 500 m, or 1000 ft
    • Printing: Custom legend, language, direction, and 500 mm – 1000 mm repeat spacing
    • Packing:Roll, carton, batch label, and pallet identification available
    Read moreDone

  • Underground Warning Tape With Tracer Wire

    • Material: PE/OPP laminated film
    • Tracer wire: SS304 or SS316
    • Wire diameter: 0.4mm, 0.5mm, 0.7mm
    • Tape thickness: 100um, 130um, 150um
    • Width/length: 75mm-300mm, 100m-500m
    • Color/print: APWA colors, custom legends
    Read moreDone

  • Industrial Floor Marking Tape

    • Material: PVC/vinyl film
    • Adhesive: Rubber pressure-sensitive adhesive
    • Common widths: 48 mm, 50 mm, 75 mm, 100 mm
    • Common colors: Yellow, red, blue, green, white, black, striped
    • Roll length: 30 m, 33 m, 50 m, custom length
    • Use surface: Clean concrete, epoxy floor, sealed industrial floor
    Read moreDone