No products were found matching your selection.

Other Related Products

  • Flagging Tape Non Adhesive

    • Size: 1 in, 1 3/16 in, 1.5 in
    • Length: 150 ft, 300 ft, 600 ft
    • Material: PE, PVC, PP optional
    • Colors: orange, pink, yellow, red, blue, green, white
    • Structure: non-adhesive plastic ribbon
    • Use: tie, wrap, knot, or staple
    Read moreDone

  • Reflective Sheeting For Traffic Signs

    • Roll size: 1.22 m x 45.7 m
    • Width tolerance: +/- 2 mm typical
    • Colors: white, yellow, red, blue, green, orange, black
    • Structure: PVC, PET, PC, or PMMA-based film
    • Adhesive: permanent pressure-sensitive adhesive
    • Liner: release paper or film liner
    Read moreDone

  • Non Detectable Underground Warning Tape

    • Material: PE, LDPE, or LLDPE non-adhesive film
    • Thickness: 4 mil / 0.1 mm, typical tolerance +/- 10%
    • Widths: 3 inch, 6 inch, 12 inch, or 50 / 75 / 100 / 150 mm
    • Roll lengths: 100 m, 250 m, 500 m, or 1000 ft
    • Printing: Custom legend, language, direction, and 500 mm – 1000 mm repeat spacing
    • Packing:Roll, carton, batch label, and pallet identification available
    Read moreDone

  • Glow In The Dark Anti Slip Tape

    • Product: glow in the dark anti slip tape
    • Brand: Safe Warning Tape Company
    • Backing: PET or PVC film
    • Surface: coarse mineral grit
    • Use areas: stairs, corridors, ramps, landings
    • Custom options: width, roll length, cut size
    Read moreDone

  • Detectable Underground Warning Mesh

    • Common width: 100mm, 150mm, 200mm, 300mm, 500mm, 700mm
    • Roll length: 100m, 250m, 500m
    • Material: PP or HDPE mesh
    • Locator element: stainless steel wire or aluminum strip
    • Colors: yellow, red, blue, green, orange, or custom
    • Text: custom buried utility warning text
    Read moreDone

  • Warehouse & Factory Floor Marking Solutions

    A reliable tape for warehouse floor marking must do more than create a visible line. It must match the traffic pattern, floor condition, cleaning routine, operating temperature, and future removal plan. This solution is intended for pedestrian walkways, forklift routes, pallet locations, work cells, loading approaches, quarantine zones, and equipment-clearance boundaries. The main risks are weak contact, edge lifting, lateral movement, backing wear, adhesive transfer, and disturbance of an existing floor coating. Selection should therefore be based on the actual surface, traffic action, application pressure, bond-building time, and a representative site trial—not color or thickness alone.

    Read moreDone

  • Clear Non Slip Tape For Stairs

    • Size: 25mm, 50mm, 75mm, 100mm, custom slit rolls
    • Color: Clear transparent, light frosted grip finish
    • Material: PVC or PET carrier with textured grip surface
    • Adhesive: Acrylic adhesive, typical 80um-120um layer
    • Thickness: Typical total thickness 0.65mm-0.85mm
    • Supply: Roll stock for stair tread cutting
    Read moreDone

  • Industrial Floor Marking Tape

    • Material: PVC/vinyl film
    • Adhesive: Rubber pressure-sensitive adhesive
    • Common widths: 48 mm, 50 mm, 75 mm, 100 mm
    • Common colors: Yellow, red, blue, green, white, black, striped
    • Roll length: 30 m, 33 m, 50 m, custom length
    • Use surface: Clean concrete, epoxy floor, sealed industrial floor
    Read moreDone

  • Thermoplastic Road Marking Tape

    •  Typical Thickness: 1.6-2.2mm
    •  Colors: White, yellow, red, blue, black
    •  Material: Hot-melt thermoplastic compound
    •  Reflective Structure: Embedded glass beads
    •  Installation: Torch heating, compression, cooling
    •  Uses: Lines, arrows, symbols, crosswalks
    Read moreDone