No products were found matching your selection.

Other Related Products

  • Non Adhesive Barrier Tape

    • Material: PE, LDPE, or HDPE film
    • Common Width: 50 mm, 75 mm, 100 mm
    • Thickness: 30 um-100 um
    • Roll Length: 100 m, 200 m, 300 m, 500 m
    • Colors: yellow/black, red/white
    • Installation: tying, stapling, nailing, wrapping
  • Non Detectable Underground Warning Tape

    • Material: PE, LDPE, or LLDPE non-adhesive film
    • Thickness: 4 mil / 0.1 mm, typical tolerance +/- 10%
    • Widths: 3 inch, 6 inch, 12 inch, or 50 / 75 / 100 / 150 mm
    • Roll lengths: 100 m, 250 m, 500 m, or 1000 ft
    • Printing: Custom legend, language, direction, and 500 mm – 1000 mm repeat spacing
    • Packing:Roll, carton, batch label, and pallet identification available
  • Flagging Tape Non Adhesive

    • Size: 1 in, 1 3/16 in, 1.5 in
    • Length: 150 ft, 300 ft, 600 ft
    • Material: PE, PVC, PP optional
    • Colors: orange, pink, yellow, red, blue, green, white
    • Structure: non-adhesive plastic ribbon
    • Use: tie, wrap, knot, or staple
  • Underground Warning Tape With Tracer Wire

    • Material: PE/OPP laminated film
    • Tracer wire: SS304 or SS316
    • Wire diameter: 0.4mm, 0.5mm, 0.7mm
    • Tape thickness: 100um, 130um, 150um
    • Width/length: 75mm-300mm, 100m-500m
    • Color/print: APWA colors, custom legends
  • Warehouse & Factory Floor Marking Solutions

    A reliable tape for warehouse floor marking must do more than create a visible line. It must match the traffic pattern, floor condition, cleaning routine, operating temperature, and future removal plan. This solution is intended for pedestrian walkways, forklift routes, pallet locations, work cells, loading approaches, quarantine zones, and equipment-clearance boundaries. The main risks are weak contact, edge lifting, lateral movement, backing wear, adhesive transfer, and disturbance of an existing floor coating. Selection should therefore be based on the actual surface, traffic action, application pressure, bond-building time, and a representative site trial—not color or thickness alone.

  • Metal Detectable Foil Tapes

    • Common size: 10mm-500mm width, 30m-1000m length
    • Color: Silver, red, blue, yellow, or custom surface color
    • Material: Aluminum foil, PET, paper, PTFE glass, or laminated film
    • Structure: Single coated, double coated, or non-adhesive foil strip
    • Thickness: 0.08mm-0.28mm typical total thickness
    • Supply:Slit rolls, sample rolls, jumbo rolls, or die-cut pieces
  • Caution Tape Technical Data Sheet: Tensile Strength & Specifications

    A tensile value for caution tape is useful only when the tested film, thickness, specimen direction, and test conditions are known. For non-adhesive PE barricade film, the tensile strength of caution tape should be read together with elongation and MD/TD behavior rather than treated as a universal load rating. Use the data to compare equivalent…

  • Reflective Sheeting For Traffic Signs

    • Roll size: 1.22 m x 45.7 m
    • Width tolerance: +/- 2 mm typical
    • Colors: white, yellow, red, blue, green, orange, black
    • Structure: PVC, PET, PC, or PMMA-based film
    • Adhesive: permanent pressure-sensitive adhesive
    • Liner: release paper or film liner
  • Detectable Underground Utility Marking Tape

    • Common Widths: 2 inch, 3 inch, 6 inch, or project-specific width
    • Roll Lengths: 500 ft, 1000 ft, or custom roll length
    • Structure: PE or PET film with continuous aluminum foil layer
    • Colors: APWA red, yellow, orange, blue, green, purple and custom colors
    • Printing: Buried utility legends, 20 inch – 36 inch repeat available
    • Use: Direct burial above utility lines before trench backfill