No products were found matching your selection.

Other Related Products

  • Underground Warning Tape With Tracer Wire

    • Material: PE/OPP laminated film
    • Tracer wire: SS304 or SS316
    • Wire diameter: 0.4mm, 0.5mm, 0.7mm
    • Tape thickness: 100um, 130um, 150um
    • Width/length: 75mm-300mm, 100m-500m
    • Color/print: APWA colors, custom legends
  • Thermoplastic Road Marking Tape

    •  Typical Thickness: 1.6-2.2mm
    •  Colors: White, yellow, red, blue, black
    •  Material: Hot-melt thermoplastic compound
    •  Reflective Structure: Embedded glass beads
    •  Installation: Torch heating, compression, cooling
    •  Uses: Lines, arrows, symbols, crosswalks
  • Industrial Floor Marking Tape

    • Material: PVC/vinyl film
    • Adhesive: Rubber pressure-sensitive adhesive
    • Common widths: 48 mm, 50 mm, 75 mm, 100 mm
    • Common colors: Yellow, red, blue, green, white, black, striped
    • Roll length: 30 m, 33 m, 50 m, custom length
    • Use surface: Clean concrete, epoxy floor, sealed industrial floor
  • Non Detectable Underground Warning Tape

    • Material: PE, LDPE, or LLDPE non-adhesive film
    • Thickness: 4 mil / 0.1 mm, typical tolerance +/- 10%
    • Widths: 3 inch, 6 inch, 12 inch, or 50 / 75 / 100 / 150 mm
    • Roll lengths: 100 m, 250 m, 500 m, or 1000 ft
    • Printing: Custom legend, language, direction, and 500 mm – 1000 mm repeat spacing
    • Packing:Roll, carton, batch label, and pallet identification available
  • black-tape-you-put-on-floor-to-stop-slipping

    Slip Resistant Tape For Stairs

    • Regular widths: 25 mm, 50 mm, 100 mm, with custom stair strip sizes
    • Colors: black, gray, yellow-black warning, or project colors
    • Surface: mineral grit abrasive layer for high-friction shoe contact
    • Backing: PVC/PET film, with foil-backed option for textured metal steps
    • Adhesive: pressure-sensitive acrylic adhesive with release liner
    • Supply format: rolls, pre-cut strips, rounded-corner die cuts
  • Warehouse & Factory Floor Marking Solutions

    A reliable tape for warehouse floor marking must do more than create a visible line. It must match the traffic pattern, floor condition, cleaning routine, operating temperature, and future removal plan. This solution is intended for pedestrian walkways, forklift routes, pallet locations, work cells, loading approaches, quarantine zones, and equipment-clearance boundaries. The main risks are weak contact, edge lifting, lateral movement, backing wear, adhesive transfer, and disturbance of an existing floor coating. Selection should therefore be based on the actual surface, traffic action, application pressure, bond-building time, and a representative site trial—not color or thickness alone.

  • Caution Tape Technical Data Sheet: Tensile Strength & Specifications

    A tensile value for caution tape is useful only when the tested film, thickness, specimen direction, and test conditions are known. For non-adhesive PE barricade film, the tensile strength of caution tape should be read together with elongation and MD/TD behavior rather than treated as a universal load rating. Use the data to compare equivalent…

  • Reflective Sheeting For Traffic Signs

    • Roll size: 1.22 m x 45.7 m
    • Width tolerance: +/- 2 mm typical
    • Colors: white, yellow, red, blue, green, orange, black
    • Structure: PVC, PET, PC, or PMMA-based film
    • Adhesive: permanent pressure-sensitive adhesive
    • Liner: release paper or film liner
  • Photoluminescent Glow In Dark Film

    • Common Size: 1.22 m x 45.7 m roll
    • Color: Yellow-green surface
    • Material: PVC/PET based film
    • Structure: Surface film + photoluminescent layer + adhesive
    • Backing: Permanent acrylic adhesive with release liner
    • Use: Exit signs, stairs, corridors, route markers