No products were found matching your selection.

Other Related Products

  • Flagging Tape Non Adhesive

    • Size: 1 in, 1 3/16 in, 1.5 in
    • Length: 150 ft, 300 ft, 600 ft
    • Material: PE, PVC, PP optional
    • Colors: orange, pink, yellow, red, blue, green, white
    • Structure: non-adhesive plastic ribbon
    • Use: tie, wrap, knot, or staple
  • Non Adhesive Barrier Tape

    • Material: PE, LDPE, or HDPE film
    • Common Width: 50 mm, 75 mm, 100 mm
    • Thickness: 30 um-100 um
    • Roll Length: 100 m, 200 m, 300 m, 500 m
    • Colors: yellow/black, red/white
    • Installation: tying, stapling, nailing, wrapping
  • Clear Non Slip Tape For Stairs

    • Size: 25mm, 50mm, 75mm, 100mm, custom slit rolls
    • Color: Clear transparent, light frosted grip finish
    • Material: PVC or PET carrier with textured grip surface
    • Adhesive: Acrylic adhesive, typical 80um-120um layer
    • Thickness: Typical total thickness 0.65mm-0.85mm
    • Supply: Roll stock for stair tread cutting
  • Thermoplastic Road Marking Tape

    •  Typical Thickness: 1.6-2.2mm
    •  Colors: White, yellow, red, blue, black
    •  Material: Hot-melt thermoplastic compound
    •  Reflective Structure: Embedded glass beads
    •  Installation: Torch heating, compression, cooling
    •  Uses: Lines, arrows, symbols, crosswalks
  • Underground Warning Tape With Tracer Wire

    • Material: PE/OPP laminated film
    • Tracer wire: SS304 or SS316
    • Wire diameter: 0.4mm, 0.5mm, 0.7mm
    • Tape thickness: 100um, 130um, 150um
    • Width/length: 75mm-300mm, 100m-500m
    • Color/print: APWA colors, custom legends
  • Photoluminescent Glow In Dark Film

    • Common Size: 1.22 m x 45.7 m roll
    • Color: Yellow-green surface
    • Material: PVC/PET based film
    • Structure: Surface film + photoluminescent layer + adhesive
    • Backing: Permanent acrylic adhesive with release liner
    • Use: Exit signs, stairs, corridors, route markers
  • Reflective Traffic Safety Tape

    • Standard Size: 50 mm x 45.7 m
    • Colors: Red-white, yellow-black, yellow, white, orange-white
    • Material: PET or PVC reflective film
    • Adhesive: Outdoor acrylic pressure sensitive adhesive
    • Reflective Grade: Engineer grade, high intensity, microprismatic
    • Format:Roll, slit roll, pre-cut strip
  • AGV Magnetic Stripe Protective Tape

    • Material: PVC wear layer
    • Color: Yellow, black, red, or custom color
    • Width: 50 mm / 80 mm / 100 mm
    • Thickness: 0.5 mm / 0.7 mm / 1.0 mm
    • Adhesive: Pressure-sensitive acrylic adhesive
    • Edge: Sloped edge for lifting control
  • Detectable Underground Utility Marking Tape

    • Common Widths: 2 inch, 3 inch, 6 inch, or project-specific width
    • Roll Lengths: 500 ft, 1000 ft, or custom roll length
    • Structure: PE or PET film with continuous aluminum foil layer
    • Colors: APWA red, yellow, orange, blue, green, purple and custom colors
    • Printing: Buried utility legends, 20 inch – 36 inch repeat available
    • Use: Direct burial above utility lines before trench backfill