No products were found matching your selection.

Other Related Products

  • Non Adhesive Barrier Tape

    • Material: PE, LDPE, or HDPE film
    • Common Width: 50 mm, 75 mm, 100 mm
    • Thickness: 30 um-100 um
    • Roll Length: 100 m, 200 m, 300 m, 500 m
    • Colors: yellow/black, red/white
    • Installation: tying, stapling, nailing, wrapping
  • black-tape-you-put-on-floor-to-stop-slipping

    Slip Resistant Tape For Stairs

    • Regular widths: 25 mm, 50 mm, 100 mm, with custom stair strip sizes
    • Colors: black, gray, yellow-black warning, or project colors
    • Surface: mineral grit abrasive layer for high-friction shoe contact
    • Backing: PVC/PET film, with foil-backed option for textured metal steps
    • Adhesive: pressure-sensitive acrylic adhesive with release liner
    • Supply format: rolls, pre-cut strips, rounded-corner die cuts
  • Warning Tape Solutions for the Electrical Industry

    Warning tapes for the electrical industry do not perform one single job. A temporary maintenance boundary, an adhesive line around electrical equipment, and a buried warning layer above a power route create different demands on visibility, attachment, durability, and removal. The selection should start with the work condition: temporary or fixed, adhesive or non-adhesive, above…

  • Caution Tape Technical Data Sheet: Tensile Strength & Specifications

    A tensile value for caution tape is useful only when the tested film, thickness, specimen direction, and test conditions are known. For non-adhesive PE barricade film, the tensile strength of caution tape should be read together with elongation and MD/TD behavior rather than treated as a universal load rating. Use the data to compare equivalent…

  • Reflective Sheeting For Traffic Signs

    • Roll size: 1.22 m x 45.7 m
    • Width tolerance: +/- 2 mm typical
    • Colors: white, yellow, red, blue, green, orange, black
    • Structure: PVC, PET, PC, or PMMA-based film
    • Adhesive: permanent pressure-sensitive adhesive
    • Liner: release paper or film liner
  • Underground Warning Tape With Tracer Wire

    • Material: PE/OPP laminated film
    • Tracer wire: SS304 or SS316
    • Wire diameter: 0.4mm, 0.5mm, 0.7mm
    • Tape thickness: 100um, 130um, 150um
    • Width/length: 75mm-300mm, 100m-500m
    • Color/print: APWA colors, custom legends
  • AGV Magnetic Stripe Protective Tape

    • Material: PVC wear layer
    • Color: Yellow, black, red, or custom color
    • Width: 50 mm / 80 mm / 100 mm
    • Thickness: 0.5 mm / 0.7 mm / 1.0 mm
    • Adhesive: Pressure-sensitive acrylic adhesive
    • Edge: Sloped edge for lifting control
  • Warehouse & Factory Floor Marking Solutions

    A reliable tape for warehouse floor marking must do more than create a visible line. It must match the traffic pattern, floor condition, cleaning routine, operating temperature, and future removal plan. This solution is intended for pedestrian walkways, forklift routes, pallet locations, work cells, loading approaches, quarantine zones, and equipment-clearance boundaries. The main risks are weak contact, edge lifting, lateral movement, backing wear, adhesive transfer, and disturbance of an existing floor coating. Selection should therefore be based on the actual surface, traffic action, application pressure, bond-building time, and a representative site trial—not color or thickness alone.

  • Detectable Underground Utility Marking Tape

    • Common Widths: 2 inch, 3 inch, 6 inch, or project-specific width
    • Roll Lengths: 500 ft, 1000 ft, or custom roll length
    • Structure: PE or PET film with continuous aluminum foil layer
    • Colors: APWA red, yellow, orange, blue, green, purple and custom colors
    • Printing: Buried utility legends, 20 inch – 36 inch repeat available
    • Use: Direct burial above utility lines before trench backfill