No products were found matching your selection.
Other Related Products
-
- Standard Size: 50 mm x 45.7 m
- Colors: Red-white, yellow-black, yellow, white, orange-white
- Material: PET or PVC reflective film
- Adhesive: Outdoor acrylic pressure sensitive adhesive
- Reflective Grade: Engineer grade, high intensity, microprismatic
- Format:Roll, slit roll, pre-cut strip
-
Hydro testing barrier tape helps define a temporary restricted-access boundary around pipelines, pressure vessels, manifolds, valves, hoses, and maintenance equipment during pressure-related work. The boundary should follow the approved test plan and site-specific risk assessment rather than a universal distance or color rule. Selection depends on warning visibility, printed-message clarity, wind exposure, support spacing, expected…
-
- Material: PE/OPP laminated film
- Tracer wire: SS304 or SS316
- Wire diameter: 0.4mm, 0.5mm, 0.7mm
- Tape thickness: 100um, 130um, 150um
- Width/length: 75mm-300mm, 100m-500m
- Color/print: APWA colors, custom legends
-
- Material: PVC/vinyl film
- Adhesive: Rubber pressure-sensitive adhesive
- Common widths: 48 mm, 50 mm, 75 mm, 100 mm
- Common colors: Yellow, red, blue, green, white, black, striped
- Roll length: 30 m, 33 m, 50 m, custom length
- Use surface: Clean concrete, epoxy floor, sealed industrial floor
-
- Roll size: 1.22 m x 45.7 m
- Width tolerance: +/- 2 mm typical
- Colors: white, yellow, red, blue, green, orange, black
- Structure: PVC, PET, PC, or PMMA-based film
- Adhesive: permanent pressure-sensitive adhesive
- Liner: release paper or film liner
-
Emergency services barrier tape helps response teams create visible, temporary boundaries around fire scenes, rescue operations, vehicle incidents, damaged structures, hazardous releases, and other changing work areas. Effective incident scene control depends on more than tape color or roll size. Teams should first define the hazard, who requires access, how the perimeter may change, and…
-
- Size: 1 in, 1 3/16 in, 1.5 in
- Length: 150 ft, 300 ft, 600 ft
- Material: PE, PVC, PP optional
- Colors: orange, pink, yellow, red, blue, green, white
- Structure: non-adhesive plastic ribbon
- Use: tie, wrap, knot, or staple
-
- Material: PE, LDPE, or HDPE film
- Common Width: 50 mm, 75 mm, 100 mm
- Thickness: 30 um-100 um
- Roll Length: 100 m, 200 m, 300 m, 500 m
- Colors: yellow/black, red/white
- Installation: tying, stapling, nailing, wrapping
-
DOT trailer reflective tape requirements combine vehicle eligibility, placement dimensions, material identification, optical performance, adhesive behavior, and installation control. This reference applies to pressure-sensitive red-and-white conspicuity sheeting used on qualifying commercial trailers and semitrailers. Regulatory dimensions are mandatory where applicable, while thickness, peel adhesion, holding power, temperature, and weathering values remain grade-specific or project-confirmed. Verify…
