No products were found matching your selection.

Other Related Products

  • Flagging Tape Non Adhesive

    • Size: 1 in, 1 3/16 in, 1.5 in
    • Length: 150 ft, 300 ft, 600 ft
    • Material: PE, PVC, PP optional
    • Colors: orange, pink, yellow, red, blue, green, white
    • Structure: non-adhesive plastic ribbon
    • Use: tie, wrap, knot, or staple
    Read moreDone

  • Clear Non Slip Tape For Stairs

    • Size: 25mm, 50mm, 75mm, 100mm, custom slit rolls
    • Color: Clear transparent, light frosted grip finish
    • Material: PVC or PET carrier with textured grip surface
    • Adhesive: Acrylic adhesive, typical 80um-120um layer
    • Thickness: Typical total thickness 0.65mm-0.85mm
    • Supply: Roll stock for stair tread cutting
    Read moreDone

  • Reflective Sheeting For Traffic Signs

    • Roll size: 1.22 m x 45.7 m
    • Width tolerance: +/- 2 mm typical
    • Colors: white, yellow, red, blue, green, orange, black
    • Structure: PVC, PET, PC, or PMMA-based film
    • Adhesive: permanent pressure-sensitive adhesive
    • Liner: release paper or film liner
    Read moreDone

  • Reflective Traffic Safety Tape

    • Standard Size: 50 mm x 45.7 m
    • Colors: Red-white, yellow-black, yellow, white, orange-white
    • Material: PET or PVC reflective film
    • Adhesive: Outdoor acrylic pressure sensitive adhesive
    • Reflective Grade: Engineer grade, high intensity, microprismatic
    • Format:Roll, slit roll, pre-cut strip
    Read moreDone

  • Reflective Strips For Sign Posts

    • Common Sizes: 2 in, 3 in, 4 in widths
    • Colors: Yellow, red/white, yellow/black
    • Material: PVC or PET reflective film
    • Structure: Glass bead or micro-prismatic
    • Adhesive: Pressure-sensitive acrylic backing
    • Tested Surfaces: Metal, PVC, plastic bollards
    Read moreDone

  • Metal Detectable Foil Tapes

    • Common size: 10mm-500mm width, 30m-1000m length
    • Color: Silver, red, blue, yellow, or custom surface color
    • Material: Aluminum foil, PET, paper, PTFE glass, or laminated film
    • Structure: Single coated, double coated, or non-adhesive foil strip
    • Thickness: 0.08mm-0.28mm typical total thickness
    • Supply:Slit rolls, sample rolls, jumbo rolls, or die-cut pieces
    Read moreDone

  • DOT Trailer Reflective Tape Requirements: Placement and Installation Guide

    DOT trailer reflective tape requirements combine vehicle eligibility, placement dimensions, material identification, optical performance, adhesive behavior, and installation control. This reference applies to pressure-sensitive red-and-white conspicuity sheeting used on qualifying commercial trailers and semitrailers. Regulatory dimensions are mandatory where applicable, while thickness, peel adhesion, holding power, temperature, and weathering values remain grade-specific or project-confirmed. Verify…

    Read moreDone

  • Photoluminescent Glow In Dark Film

    • Common Size: 1.22 m x 45.7 m roll
    • Color: Yellow-green surface
    • Material: PVC/PET based film
    • Structure: Surface film + photoluminescent layer + adhesive
    • Backing: Permanent acrylic adhesive with release liner
    • Use: Exit signs, stairs, corridors, route markers
    Read moreDone

  • Reflective Tape Technical Data: DOT-C2, Conspicuity & Prismatic Sheeting Specifications

    Conspicuity tape DOT C2 data should define material construction, dimensions, photometric performance, adhesive behavior, temperature limits, surface compatibility, and the conditions behind each result. This record is for pressure-sensitive microprismatic vehicle marking sheeting, not ordinary reflective tape. Regulatory minimums support screening, while peel behavior, edge stability, weathering response, and removal observations should be confirmed by sample testing on the intended coated surface before full use.

    Read moreDone