No products were found matching your selection.

Other Related Products

  • Flagging Tape Non Adhesive

    • Size: 1 in, 1 3/16 in, 1.5 in
    • Length: 150 ft, 300 ft, 600 ft
    • Material: PE, PVC, PP optional
    • Colors: orange, pink, yellow, red, blue, green, white
    • Structure: non-adhesive plastic ribbon
    • Use: tie, wrap, knot, or staple
    Read moreDone
  • black-tape-you-put-on-floor-to-stop-slipping

    Slip Resistant Tape For Stairs

    • Regular widths: 25 mm, 50 mm, 100 mm, with custom stair strip sizes
    • Colors: black, gray, yellow-black warning, or project colors
    • Surface: mineral grit abrasive layer for high-friction shoe contact
    • Backing: PVC/PET film, with foil-backed option for textured metal steps
    • Adhesive: pressure-sensitive acrylic adhesive with release liner
    • Supply format: rolls, pre-cut strips, rounded-corner die cuts
    Read moreDone

  • Reflective Strips For Sign Posts

    • Common Sizes: 2 in, 3 in, 4 in widths
    • Colors: Yellow, red/white, yellow/black
    • Material: PVC or PET reflective film
    • Structure: Glass bead or micro-prismatic
    • Adhesive: Pressure-sensitive acrylic backing
    • Tested Surfaces: Metal, PVC, plastic bollards
    Read moreDone

  • Industrial Floor Marking Tape

    • Material: PVC/vinyl film
    • Adhesive: Rubber pressure-sensitive adhesive
    • Common widths: 48 mm, 50 mm, 75 mm, 100 mm
    • Common colors: Yellow, red, blue, green, white, black, striped
    • Roll length: 30 m, 33 m, 50 m, custom length
    • Use surface: Clean concrete, epoxy floor, sealed industrial floor
    Read moreDone

  • Industrial Testing and Maintenance Work Zone Safety Solutions

    Hydro testing barrier tape helps define a temporary restricted-access boundary around pipelines, pressure vessels, manifolds, valves, hoses, and maintenance equipment during pressure-related work. The boundary should follow the approved test plan and site-specific risk assessment rather than a universal distance or color rule. Selection depends on warning visibility, printed-message clarity, wind exposure, support spacing, expected…

    Read moreDone

  • Non Detectable Underground Warning Tape

    • Material: PE, LDPE, or LLDPE non-adhesive film
    • Thickness: 4 mil / 0.1 mm, typical tolerance +/- 10%
    • Widths: 3 inch, 6 inch, 12 inch, or 50 / 75 / 100 / 150 mm
    • Roll lengths: 100 m, 250 m, 500 m, or 1000 ft
    • Printing: Custom legend, language, direction, and 500 mm – 1000 mm repeat spacing
    • Packing:Roll, carton, batch label, and pallet identification available
    Read moreDone

  • Underground Warning Tape With Tracer Wire

    • Material: PE/OPP laminated film
    • Tracer wire: SS304 or SS316
    • Wire diameter: 0.4mm, 0.5mm, 0.7mm
    • Tape thickness: 100um, 130um, 150um
    • Width/length: 75mm-300mm, 100m-500m
    • Color/print: APWA colors, custom legends
    Read moreDone

  • Detectable Underground Utility Marking Tape

    • Common Widths: 2 inch, 3 inch, 6 inch, or project-specific width
    • Roll Lengths: 500 ft, 1000 ft, or custom roll length
    • Structure: PE or PET film with continuous aluminum foil layer
    • Colors: APWA red, yellow, orange, blue, green, purple and custom colors
    • Printing: Buried utility legends, 20 inch – 36 inch repeat available
    • Use: Direct burial above utility lines before trench backfill
    Read moreDone

  • Reflective Sheeting For Traffic Signs

    • Roll size: 1.22 m x 45.7 m
    • Width tolerance: +/- 2 mm typical
    • Colors: white, yellow, red, blue, green, orange, black
    • Structure: PVC, PET, PC, or PMMA-based film
    • Adhesive: permanent pressure-sensitive adhesive
    • Liner: release paper or film liner
    Read moreDone