No products were found matching your selection.

Other Related Products

  • Non Adhesive Barrier Tape

    • Material: PE, LDPE, or HDPE film
    • Common Width: 50 mm, 75 mm, 100 mm
    • Thickness: 30 um-100 um
    • Roll Length: 100 m, 200 m, 300 m, 500 m
    • Colors: yellow/black, red/white
    • Installation: tying, stapling, nailing, wrapping
    Read moreDone

  • Industrial Floor Marking Tape

    • Material: PVC/vinyl film
    • Adhesive: Rubber pressure-sensitive adhesive
    • Common widths: 48 mm, 50 mm, 75 mm, 100 mm
    • Common colors: Yellow, red, blue, green, white, black, striped
    • Roll length: 30 m, 33 m, 50 m, custom length
    • Use surface: Clean concrete, epoxy floor, sealed industrial floor
    Read moreDone

  • Photoluminescent Glow In Dark Film

    • Common Size: 1.22 m x 45.7 m roll
    • Color: Yellow-green surface
    • Material: PVC/PET based film
    • Structure: Surface film + photoluminescent layer + adhesive
    • Backing: Permanent acrylic adhesive with release liner
    • Use: Exit signs, stairs, corridors, route markers
    Read moreDone

  • Thermoplastic Road Marking Tape

    •  Typical Thickness: 1.6-2.2mm
    •  Colors: White, yellow, red, blue, black
    •  Material: Hot-melt thermoplastic compound
    •  Reflective Structure: Embedded glass beads
    •  Installation: Torch heating, compression, cooling
    •  Uses: Lines, arrows, symbols, crosswalks
    Read moreDone

  • AGV Magnetic Stripe Protective Tape

    • Material: PVC wear layer
    • Color: Yellow, black, red, or custom color
    • Width: 50 mm / 80 mm / 100 mm
    • Thickness: 0.5 mm / 0.7 mm / 1.0 mm
    • Adhesive: Pressure-sensitive acrylic adhesive
    • Edge: Sloped edge for lifting control
    Read moreDone

  • Reflective Traffic Safety Tape

    • Standard Size: 50 mm x 45.7 m
    • Colors: Red-white, yellow-black, yellow, white, orange-white
    • Material: PET or PVC reflective film
    • Adhesive: Outdoor acrylic pressure sensitive adhesive
    • Reflective Grade: Engineer grade, high intensity, microprismatic
    • Format:Roll, slit roll, pre-cut strip
    Read moreDone

  • Non Detectable Underground Warning Tape

    • Material: PE, LDPE, or LLDPE non-adhesive film
    • Thickness: 4 mil / 0.1 mm, typical tolerance +/- 10%
    • Widths: 3 inch, 6 inch, 12 inch, or 50 / 75 / 100 / 150 mm
    • Roll lengths: 100 m, 250 m, 500 m, or 1000 ft
    • Printing: Custom legend, language, direction, and 500 mm – 1000 mm repeat spacing
    • Packing:Roll, carton, batch label, and pallet identification available
    Read moreDone

  • Reflective Tape Technical Data: DOT-C2, Conspicuity & Prismatic Sheeting Specifications

    Conspicuity tape DOT C2 data should define material construction, dimensions, photometric performance, adhesive behavior, temperature limits, surface compatibility, and the conditions behind each result. This record is for pressure-sensitive microprismatic vehicle marking sheeting, not ordinary reflective tape. Regulatory minimums support screening, while peel behavior, edge stability, weathering response, and removal observations should be confirmed by sample testing on the intended coated surface before full use.

    Read moreDone

  • Caution Tape Technical Data Sheet: Tensile Strength & Specifications

    A tensile value for caution tape is useful only when the tested film, thickness, specimen direction, and test conditions are known. For non-adhesive PE barricade film, the tensile strength of caution tape should be read together with elongation and MD/TD behavior rather than treated as a universal load rating. Use the data to compare equivalent…

    Read moreDone