No products were found matching your selection.

Other Related Products

  • Reflective Traffic Safety Tape

    • Standard Size: 50 mm x 45.7 m
    • Colors: Red-white, yellow-black, yellow, white, orange-white
    • Material: PET or PVC reflective film
    • Adhesive: Outdoor acrylic pressure sensitive adhesive
    • Reflective Grade: Engineer grade, high intensity, microprismatic
    • Format:Roll, slit roll, pre-cut strip
  • Reflective Sheeting For Traffic Signs

    • Roll size: 1.22 m x 45.7 m
    • Width tolerance: +/- 2 mm typical
    • Colors: white, yellow, red, blue, green, orange, black
    • Structure: PVC, PET, PC, or PMMA-based film
    • Adhesive: permanent pressure-sensitive adhesive
    • Liner: release paper or film liner
  • AGV Magnetic Stripe Protective Tape

    • Material: PVC wear layer
    • Color: Yellow, black, red, or custom color
    • Width: 50 mm / 80 mm / 100 mm
    • Thickness: 0.5 mm / 0.7 mm / 1.0 mm
    • Adhesive: Pressure-sensitive acrylic adhesive
    • Edge: Sloped edge for lifting control
  • DOT Trailer Reflective Tape Requirements: Placement and Installation Guide

    DOT trailer reflective tape requirements combine vehicle eligibility, placement dimensions, material identification, optical performance, adhesive behavior, and installation control. This reference applies to pressure-sensitive red-and-white conspicuity sheeting used on qualifying commercial trailers and semitrailers. Regulatory dimensions are mandatory where applicable, while thickness, peel adhesion, holding power, temperature, and weathering values remain grade-specific or project-confirmed. Verify…

  • Emergency Services Barrier Tape Solutions for Incident Scene Control

    Emergency services barrier tape helps response teams create visible, temporary boundaries around fire scenes, rescue operations, vehicle incidents, damaged structures, hazardous releases, and other changing work areas. Effective incident scene control depends on more than tape color or roll size. Teams should first define the hazard, who requires access, how the perimeter may change, and…

  • Non Adhesive Barrier Tape

    • Material: PE, LDPE, or HDPE film
    • Common Width: 50 mm, 75 mm, 100 mm
    • Thickness: 30 um-100 um
    • Roll Length: 100 m, 200 m, 300 m, 500 m
    • Colors: yellow/black, red/white
    • Installation: tying, stapling, nailing, wrapping
  • Industrial Floor Marking Tape

    • Material: PVC/vinyl film
    • Adhesive: Rubber pressure-sensitive adhesive
    • Common widths: 48 mm, 50 mm, 75 mm, 100 mm
    • Common colors: Yellow, red, blue, green, white, black, striped
    • Roll length: 30 m, 33 m, 50 m, custom length
    • Use surface: Clean concrete, epoxy floor, sealed industrial floor
  • Photoluminescent Glow In Dark Film

    • Common Size: 1.22 m x 45.7 m roll
    • Color: Yellow-green surface
    • Material: PVC/PET based film
    • Structure: Surface film + photoluminescent layer + adhesive
    • Backing: Permanent acrylic adhesive with release liner
    • Use: Exit signs, stairs, corridors, route markers
  • Warning Tape Solutions for the Electrical Industry

    Warning tapes for the electrical industry do not perform one single job. A temporary maintenance boundary, an adhesive line around electrical equipment, and a buried warning layer above a power route create different demands on visibility, attachment, durability, and removal. The selection should start with the work condition: temporary or fixed, adhesive or non-adhesive, above…