No products were found matching your selection.

Other Related Products

  • Flagging Tape Non Adhesive

    • Size: 1 in, 1 3/16 in, 1.5 in
    • Length: 150 ft, 300 ft, 600 ft
    • Material: PE, PVC, PP optional
    • Colors: orange, pink, yellow, red, blue, green, white
    • Structure: non-adhesive plastic ribbon
    • Use: tie, wrap, knot, or staple
    Read moreDone

  • Reflective Sheeting For Traffic Signs

    • Roll size: 1.22 m x 45.7 m
    • Width tolerance: +/- 2 mm typical
    • Colors: white, yellow, red, blue, green, orange, black
    • Structure: PVC, PET, PC, or PMMA-based film
    • Adhesive: permanent pressure-sensitive adhesive
    • Liner: release paper or film liner
    Read moreDone

  • Warning Tape HS Code & Customs Classification

    The warning tape HS code cannot be selected from the trade name alone. For self-adhesive, non-adhesive, printed, reflective, abrasive, or detectable constructions, first identify the backing, adhesive status, roll width, print function, and added functional layers. This technical reference supports finished-roll identification and customs review; it is not a universal tariff ruling. Performance values must…

    Read moreDone

  • Thermoplastic Road Marking Tape

    •  Typical Thickness: 1.6-2.2mm
    •  Colors: White, yellow, red, blue, black
    •  Material: Hot-melt thermoplastic compound
    •  Reflective Structure: Embedded glass beads
    •  Installation: Torch heating, compression, cooling
    •  Uses: Lines, arrows, symbols, crosswalks
    Read moreDone

  • Industrial Floor Marking Tape

    • Material: PVC/vinyl film
    • Adhesive: Rubber pressure-sensitive adhesive
    • Common widths: 48 mm, 50 mm, 75 mm, 100 mm
    • Common colors: Yellow, red, blue, green, white, black, striped
    • Roll length: 30 m, 33 m, 50 m, custom length
    • Use surface: Clean concrete, epoxy floor, sealed industrial floor
    Read moreDone

  • DOT Trailer Reflective Tape Requirements: Placement and Installation Guide

    DOT trailer reflective tape requirements combine vehicle eligibility, placement dimensions, material identification, optical performance, adhesive behavior, and installation control. This reference applies to pressure-sensitive red-and-white conspicuity sheeting used on qualifying commercial trailers and semitrailers. Regulatory dimensions are mandatory where applicable, while thickness, peel adhesion, holding power, temperature, and weathering values remain grade-specific or project-confirmed. Verify…

    Read moreDone

  • AGV Magnetic Stripe Protective Tape

    • Material: PVC wear layer
    • Color: Yellow, black, red, or custom color
    • Width: 50 mm / 80 mm / 100 mm
    • Thickness: 0.5 mm / 0.7 mm / 1.0 mm
    • Adhesive: Pressure-sensitive acrylic adhesive
    • Edge: Sloped edge for lifting control
    Read moreDone

  • Photoluminescent Glow In Dark Film

    • Common Size: 1.22 m x 45.7 m roll
    • Color: Yellow-green surface
    • Material: PVC/PET based film
    • Structure: Surface film + photoluminescent layer + adhesive
    • Backing: Permanent acrylic adhesive with release liner
    • Use: Exit signs, stairs, corridors, route markers
    Read moreDone

  • Metal Detectable Foil Tapes

    • Common size: 10mm-500mm width, 30m-1000m length
    • Color: Silver, red, blue, yellow, or custom surface color
    • Material: Aluminum foil, PET, paper, PTFE glass, or laminated film
    • Structure: Single coated, double coated, or non-adhesive foil strip
    • Thickness: 0.08mm-0.28mm typical total thickness
    • Supply:Slit rolls, sample rolls, jumbo rolls, or die-cut pieces
    Read moreDone