No products were found matching your selection.

Other Related Products

  • Underground Warning Tape With Tracer Wire

    • Material: PE/OPP laminated film
    • Tracer wire: SS304 or SS316
    • Wire diameter: 0.4mm, 0.5mm, 0.7mm
    • Tape thickness: 100um, 130um, 150um
    • Width/length: 75mm-300mm, 100m-500m
    • Color/print: APWA colors, custom legends
  • AGV Magnetic Stripe Protective Tape

    • Material: PVC wear layer
    • Color: Yellow, black, red, or custom color
    • Width: 50 mm / 80 mm / 100 mm
    • Thickness: 0.5 mm / 0.7 mm / 1.0 mm
    • Adhesive: Pressure-sensitive acrylic adhesive
    • Edge: Sloped edge for lifting control
  • Clear Non Slip Tape For Stairs

    • Size: 25mm, 50mm, 75mm, 100mm, custom slit rolls
    • Color: Clear transparent, light frosted grip finish
    • Material: PVC or PET carrier with textured grip surface
    • Adhesive: Acrylic adhesive, typical 80um-120um layer
    • Thickness: Typical total thickness 0.65mm-0.85mm
    • Supply: Roll stock for stair tread cutting
  • Detectable Underground Warning Mesh

    • Common width: 100mm, 150mm, 200mm, 300mm, 500mm, 700mm
    • Roll length: 100m, 250m, 500m
    • Material: PP or HDPE mesh
    • Locator element: stainless steel wire or aluminum strip
    • Colors: yellow, red, blue, green, orange, or custom
    • Text: custom buried utility warning text
  • black-tape-you-put-on-floor-to-stop-slipping

    Slip Resistant Tape For Stairs

    • Regular widths: 25 mm, 50 mm, 100 mm, with custom stair strip sizes
    • Colors: black, gray, yellow-black warning, or project colors
    • Surface: mineral grit abrasive layer for high-friction shoe contact
    • Backing: PVC/PET film, with foil-backed option for textured metal steps
    • Adhesive: pressure-sensitive acrylic adhesive with release liner
    • Supply format: rolls, pre-cut strips, rounded-corner die cuts
  • Thermoplastic Road Marking Tape

    •  Typical Thickness: 1.6-2.2mm
    •  Colors: White, yellow, red, blue, black
    •  Material: Hot-melt thermoplastic compound
    •  Reflective Structure: Embedded glass beads
    •  Installation: Torch heating, compression, cooling
    •  Uses: Lines, arrows, symbols, crosswalks
  • Flagging Tape Non Adhesive

    • Size: 1 in, 1 3/16 in, 1.5 in
    • Length: 150 ft, 300 ft, 600 ft
    • Material: PE, PVC, PP optional
    • Colors: orange, pink, yellow, red, blue, green, white
    • Structure: non-adhesive plastic ribbon
    • Use: tie, wrap, knot, or staple
  • Photoluminescent Glow In Dark Film

    • Common Size: 1.22 m x 45.7 m roll
    • Color: Yellow-green surface
    • Material: PVC/PET based film
    • Structure: Surface film + photoluminescent layer + adhesive
    • Backing: Permanent acrylic adhesive with release liner
    • Use: Exit signs, stairs, corridors, route markers
  • Reflective Sheeting For Traffic Signs

    • Roll size: 1.22 m x 45.7 m
    • Width tolerance: +/- 2 mm typical
    • Colors: white, yellow, red, blue, green, orange, black
    • Structure: PVC, PET, PC, or PMMA-based film
    • Adhesive: permanent pressure-sensitive adhesive
    • Liner: release paper or film liner